{"product_id":"4-wood-chipper-pto-woodland-wc46-hydraulic","title":"4″ Wood Chipper PTO Woodland WC46 Hydraulic","description":"\u003ch3\u003eWoodlands Mills WC46 PTO Driven Wood Chipper Hydraulic Feed\u003c\/h3\u003e\n\u003ch5\u003eDue to the popularity of this product, please take note that there is a waiting period of ± 2 – 6  weeks.\u003c\/h5\u003e\n\u003ch5\u003ePlease contact us to confirm availability.\u003c\/h5\u003e\n\u003ch5\u003eTurfmaster p\/n: WOOD-PRO-WC46\u003c\/h5\u003e\n\u003cp\u003eThe Woodlands Mills WC46 PTO Driven Wood Chipper was designed to work with sub compact tractors with 15 hp to 30 hp at the PTO and features an auto hydraulic in-feed system, direct drive, a 4″ x 6″ (10cm x 15 cm) opening and 360 degree swivel discharge chute.\u003c\/p\u003e\n\u003ch4\u003eCapacity\u003c\/h4\u003e\n\u003cp\u003eThe WC46 operates on tractors with 15-30 HP at the PTO. It utilizes a large 19” x 18.5” (48cm x 47cm) infeed hopper opening that tapers down to a 4” x 6” (10 cm x 15 cm) opening where the 5.25” (13cm) diameter hydraulically driven infeed roller grabs the branches and feeds them through the chipper.\u003c\/p\u003e\n\u003cp\u003eBranches as small as ¼”(6mm) diameter and as large as 4” (10 cm) diameter can be fed through the WC46. To chip full 4” (10cm) diameter logs at full infeed speed, tractors with over 20 HP at the PTO is required.\u003c\/p\u003e\n\u003ch4\u003eHydraulic Infeed System\u003c\/h4\u003e\n\u003cp\u003eBranches are pulled into the WC46 via the 5.25” (13cm) diameter infeed roller. The roller is hydraulically driven via the chippers self contained hydraulic system. The roller is adjustable in direction and speed making it easy to feed branches of all shapes and sizes. The hydraulic pump is belt driven from the main flywheel shaft. The roller down pressure may be adjusted via the two large springs ensuring it grabs branches and easily pulls them in, eliminating the need for manual feeding.\u003c\/p\u003e\n\u003ch4\u003eFlywheel\u003c\/h4\u003e\n\u003cp\u003eThe dynamically balanced 18” (46cm) diameter, 3\/4” (2cm) thick solid steel flywheel runs on a 2” (5cm) diameter shaft and is supported by 2 industrial and greaseable flanged bearings. It features four CNC machined pockets to hold the reversible blades. The flywheel features four large fan blade paddles that spin at over 540 RPM.\u003c\/p\u003e\n\u003ch4\u003eFlywheel Locking Pin\u003c\/h4\u003e\n\u003cp\u003eThe WC46 wood chipper features a flywheel locking pin for convenient and safe blade changes or flywheel maintenance. The pin simply fits into a series of holes that are positioned so that every blade can be easily accessed with tools while reversing or changing them. No more unsafe blade changes with the Woodland Mills flywheel locking pin.\u003c\/p\u003e\n\u003ch4\u003eChipper Blades\u003c\/h4\u003e\n\u003cp\u003eThe WC46 chipper utilizes four high quality hardened steel reversible chipper blades. These blades are 90 degrees apart. They can be flipped to take advantage of having two cutting edges on one blade. Each blade is held onto the flywheel with four countersunk M10 bolts and locking nuts.\u003c\/p\u003e\n\u003cp\u003eChanging blades can be done very quickly thanks to the clamshell flywheel housing design. Simply undo one bolt and the upper flywheel housing rotates open, providing full access to the flywheel and chipper blades.\u003c\/p\u003e\n\u003ch4\u003eFolding Infeed Chute\u003c\/h4\u003e\n\u003cp\u003eThe infeed chute on the WC46 wood chipper has a 19” x 18.5” (48cm x 47cm) opening to feed branches into. The infeed chute can also be folded up which decreases the footprint of the chipper during storage or transport.\u003c\/p\u003e\n\u003ch4\u003eInfeed Opening\u003c\/h4\u003e\n\u003cp\u003eThe opening in the flywheel housing is 4” x 6” (10cm x 15cm) square making it capable of accept branches with several limbs.\u003c\/p\u003e\n\u003ch4\u003eDischarge Chute\u003c\/h4\u003e\n\u003cp\u003eThe discharge chute was designed to rotate 360 degrees by simply rotating it with the two handles to the desired angle. This makes it possible to direct the wood chips in any direction regardless of the location of the chipper. The end of the chute stands at 66” (1.7m) off of the ground, making it quite easy to direct the wood chips into the back of a truck or trailer if desired.\u003c\/p\u003e\n\u003cp\u003eLocated at the end of the discharge chute is a rotating deflector, which allows further control of the location of the wood chips. Simply point it straight for maximum distance or angled down to deflect the chips directly down to the ground or into a trailer.\u003c\/p\u003e\n\u003ch4\u003ePTO Shaft\u003c\/h4\u003e\n\u003cp\u003eIncluded with the WC46 chipper is the PTO shaft complete with a shear pin\u003c\/p\u003e\n\u003ch4\u003eSpecifications:\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrive System: \u003c\/strong\u003eTractor PTO\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTransport:\u003c\/strong\u003e Tractor 3 Point Hitch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum HP Required (at the PTO):\u003c\/strong\u003e 15\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum HP (at the PTO):\u003c\/strong\u003e 30\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHydraulic System:\u003c\/strong\u003e Standard NPT Fittings \u0026amp; Valves\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOil Hydraulic :\u003c\/strong\u003e 17 L \/ 4.5 gallons of ISO 32 or ISO 46 (warmer climates)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHydraulic Pump:\u003c\/strong\u003e Belt Driven\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlywheel Diameter\/Thickness\u003c\/strong\u003e: 18″ x 3\/4″ thick (46cm x 2.0 cm thick)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlywheel Speed:\u003c\/strong\u003e 540 RPM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrive System Flywheel :\u003c\/strong\u003e Direct Drive\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHousing Design Flywheel :\u003c\/strong\u003e Easy To Open Clamshell (for easy clean out and blade changes)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHousing Thickness Flywheel :\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e5\/16″ (8mm) Thick\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlywheel Shaft:\u003c\/strong\u003e 2″ (50mm) Diameter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Blades:\u003c\/strong\u003e 4 Reversible Blades\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePTO Shaft: \u003c\/strong\u003eShear Pin Protected PTO Shaft Included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIn-feed System: \u003c\/strong\u003eSelf Contained Hydraulic System\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIn-feed Drive: \u003c\/strong\u003eForward\/Neutral\/Reverse With Variable Speed (0-75 ft-min) \/ (23 m\/min)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIn-feed Roller Size:\u003c\/strong\u003e 5.25″ (13cm) Chisel Tooth\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIn-feed Opening:\u003c\/strong\u003e 4″ tall x 6″ wide (10cm x 15cm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIn-feed Roller Pressure: \u003c\/strong\u003eAdjustable via Spring Tension\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eQuick Hitch Compatible: Yes\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDischarge Chute: \u003c\/strong\u003e360 Degree Swivel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChipper Base:\u003c\/strong\u003e Laser Cut Plate Design\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Powder Coat Paint\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 3 Year\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 648 lbs (294 kg)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg decoding=\"async\" src=\"https:\/\/www.turfmaster.co.za\/wp-content\/uploads\/2020\/06\/woodland_mills_wc46-320x320.jpg\" alt='4\" Wood Chipper PTO Woodland WC46 Hydraulic'\u003e\u003c\/p\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":46625638154498,"sku":"WOOD-PRO-WC46","price":103385.0,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0767\/4416\/3586\/files\/woodland_mills_wc46-jpg.webp?v=1753616851","url":"https:\/\/bushmastershop.myshopify.com\/products\/4-wood-chipper-pto-woodland-wc46-hydraulic","provider":"Bushmaster","version":"1.0","type":"link"}